Media Gallery
Two-phase CFD simulation of a solitary wave breaking on a 1:12 scale monopile. The water phase is shown, colored by horizontal velocity.
Credits: Hannah Johlas
A volume rendering of fuel mass fraction for flash-boiling (left) and non-flashing (right) gasoline direct injection sprays based upon the Engine Combustion Network's "spray G2" and "spray G" operating conditions. Credits: Eli Baldwin
Early development of a spray: n-dodecane injected into nitrogen at room temperature (the Engine Combustion Network's "Spray A" operating condition).
Credits : Maryam Moulai
Vortex induced vibration of a vertically mounted, surface piercing cylinder in a uniform flow. Cylinder is constrained to move in only the sway direction. The color scale indicates the flow velocity at the air-water fluid interface.
Credits: Maija Benitz
VOF simulation of bi-directional waves in a numerical tank. Irregular waves enter from two inlets, with differing wave directions and interact in the center of the domain. The air-water interface is shown.
Credits: Maija Benitz
VOF simulation of a square buoy in an irregular wave sampled from the Jonswap spectrum. A color function value of 1 indicates the water phase, and 0 the air phase.
Credits: Maija Benitz
Axisymmetric VOF simulation of a bubble collapse which forms a liquid jet. The fluid interface between air and molten cellulose is shown, and is colored by the velocity magnitude. Work published by Texeira, et al, 2011 in Energy and Environmental Science.
Credits : Kyle Mooney
Oblique collision of shear thinning droplets with 1%/wt. Xantham gum in water at We = 609. Adaptive meshing with an explicit interface tracking method is used to simulate the droplet collision.
Credits: Maija Benitz and Kyle Mooney
Credits: Maija Benitz and Kyle Mooney