LAKE SAMPLING SITE LOCATION

Equipment List - Protocol

**For the Mass. Department of Environmental Protection-approved SOP, get the pdf file here **

Locating a permanent sampling site on your lake is very important so that you or other monitors can consistently find the site. MassWWP suggests choosing the deepest spot in the lake if only sampling one site.

Equipment List

 

Protocol

 

Using a bathymetric map, go to your chosen site.

With the boat securely anchored at the site, select two permanent landmarks on shore that align one behind the other. This alignment forms an imaginary line through the objects to the site in a manner analogous to siting a gun. (See image below.)

At about a 90 degree angle to this first bearing or line, select two more aligning landmarks.

All four landmarks and your sampling site should be carefully marked on your map of the lake.

Describe each landmark so that others can easily locate it. Remember that the "white house with green shutters" may be a brown house with black shutters next year, so try to find descriptive characteristics that are not likely to change, e.g. two-story brick house with wrap-around porch and two-car garage on north side. Mark your sites on a field map. Include site code (e.g. #1, Deep Spot, etc.).

 

 

 

 

 

 

Image from EPA's Volunteer Lake Monitoring: A Methods Manual

 

OTHERS PARAMETERS